HDS02.2-W040N-HS84-01-FW

  • Rated 4.2 (17 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDS02.2-W040N-HS84-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 40A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! HDS02.2-W040N-HS84-01-FW | Rexroth, Bosch, Indramat HDS Drive Series | Image

HDS02.2-W040N-HS84-01-FW

  • Rated 4.2 (17 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDS02.2-W040N-HS84-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 40A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS02.2-W040N-HS84-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDS02.2-W040N-HS84-01-FW drive controller belongs to the DIAX04 product group of such controllers manufactured by Bosch Rexroth. This drive controller functions as a rapid-response drive when it operates with several series of the manufacturer’s AC motors. The product encompasses a modular design. It must be connected to an HVR or HVE type supply module. It provides the power and signal voltages needed for the performance of the controller. The device is designed with a line code of 2 and a design code of 2. The function ID code of 84 is determined and documented by the manufacturer. The installation as well as the use of the unit must be done only after reading and understanding the instructions documentation.

The HDS series controller may cause personal injury or product damage if is used in the tampered state. The product tends to have a high discharge current and high voltage rating during operation. This device must be installed only on commercial machinery. It is intended for operation only in the specified ambient conditions. The electrical installation should be done in adherence to the general safety and construction guidelines. The product has a current rating of 40A. The HDS02.2-W040N-HS84-01-FW drive controller is available with one-year warranty support.

The power to this device must be switched ON only after ensuring that it has a permanent ground wire connection as per the connection diagram. The unit has chances of experiencing dangerous movements in case of faulty control. These movements can take place at any point in time during operation. The emergency stop switch of the drive controller should be checked for proper functioning before the startup. The housing of this product becomes very hot during operation and can result in burns if touched. The controller can be sent to any address across the world.

HDS02.2-W040N-HS84-01-FW Documents

  • HDS022W040NHS8401FW
  • hds02.2-w040n-hs84-01-fw
  • HDS02 2 W040N HS84 01 FW

HDS02.2-W040N-HS84-01-FW Technical Specifications

Product Group: HDS
Line: 2
Version: 2
Cooling Type: Air, internal (with built-in blower)
Rated Current: 40 A
Other Versions: None
Controller Family: DIAX04
Command Communication: SERCOS Interface
Function ID Code: 84
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo