Product Description

Rexroth Indramat products are characterized as durable, high performance, top-quality and reliable. Their decades of expertise in manufacturing drive and control technology have resulted in excellent products. The HDS series of drive controllers is one of many products that Rexroth Indramat specializes in.

The HDS series consists of 2^nd generation drive controllers. The HDS02.2-W040N-HS26-01-FW is part of the HDS series. This drive controller is a 2-line 2^nd version controller with a built-in fan for cooling. It has a current rating of 40A and has no other version. The HDS02.2-W040N-HS26-01-FW belongs to the DIAX04 controller family and for command communication it has the SERCOS interface. The function ID for this controller is ‘26’. The firmware for this drive controller must be ordered as a separate item. The safe operating temperature is between 5˚C to 45˚C at an elevation between 0 to 1000 meters above sea level. In situations, where the HDS02.2-W040N-HS26-01-FW is operated beyond the indicated operational range, then the ‘load factors’ must be accounted for.

Electrostatic loads induced by tools or a person may cause damage to the drive controller or the PCBs. There must be no electrostatic load. In the HDS02.2-W040N-HS26-01-FW, the route signal lines and supply lines are separate from load supplies to avoid interference between the lines. The analog signals must also be fed through the shielded supply lines only. During high voltage or insulation check, it is advised to remove all the connections of the machine to avoid any damage to electronic components. The HDS02.2-W040N-HS26-01-FW must be operated and handled as per the manual and protective clothing must be worn at all times. The HDS02.2-W040N-HS26-01-FW can be shipped to any address worldwide with a one-year warranty period from Wake Industrial.