Product Description
The HDS02.2-W040N HDS series drive controller belongs to the DIAX04 product group. The drive controller has a line code of 2 and a version code of 2. It can be used with the MKD, MHD and 2AD series of AC motors from the manufacturer for controlling and monitoring them. The product acts as a rapid-response drive. The device can be utilized in robotics and machine tools. The unit must be connected to an HVR or an HVE supply module that provides the power and signal voltages required by the controller. It may be required to install an additional HZB brake resistor if the performance is high and the power supply is not able to support regeneration. This resistor controls the generated energy due to breaking action.
The drive controller has a peak current and a rated current of 40A. The product features a Class C insulation as per DIN VDE 0110 specifications. The device must be installed and used only after reading the documentation provided. It should be installed only in commercial machinery. The unit must be operated only if the application that it is used for is in compliance with the required national EMC regulations. The controller should not be operated even for a brief period if there is no permanent connection of the ground wire. It is intended to be operated between 5°C and 45°C.
The product has a leakage current of 3.5mA. The device may have high electric voltage if its connections are done incorrectly. The unit must be allowed to cool down for at least 10 minutes before touching it. It should neither be mounted nor installed in a damaged or malfunctioning state. The drive controller can be used in both multiple-axis and single-axis control and drive applications. The product features a modular structure. The HDS02.2-W040N controller has a one-year warranty and can be sent to the address of your preference.