HDD02.2-W016N-HD32-01-FW

  • Rated 4.2 (6 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911292793
  • Stock: Available
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDD02.2-W016N-HD32-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller has an Internal Air Cooling and a rated current of 16. The Controller Family is DIAX04 and a Command Communication of SERCOS.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

HDD02.2-W016N-HD32-01-FW

  • Rated 4.2 (6 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911292793
  • Stock: Available
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDD02.2-W016N-HD32-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller has an Internal Air Cooling and a rated current of 16. The Controller Family is DIAX04 and a Command Communication of SERCOS.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDD02.2-W016N-HD32-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDD02.2-W016N-HD32-01-FW Bosch Rexroth drive controller features a 16A current rating. This device has two ground connections to be made to the supply module. One of these connections is on the mounting rails and its back wall. The other connection is established through the grounding clip present in front of the product. The connection between the motor and the unit must be done with only motor power cables from the same manufacturer. These cables have a maximum overall length of 75m. The device has an XS1 shield attachment connector for mounting the entire motor cable shield. The drive controller is backed by a warranty of one year.

The drive controller may get damaged due to overheating if it is not mounted in the proper orientation. The unit must incorporate a cooling system when it is in use. This cooling system should be placed such that the water getting condensed does not fall on the controller. The device is a good choice for multiple or single-axis control and drive applications. The type plates of the basic unit of the controller and the firmware are housed at the top of the controller. The firmware is available as a separate subitem from the manufacturer.

The controller must be transported using appropriate transportation equipment. Shock-absorbing supports should be additionally used if there are chances of excessive vibrations and shocks during transport. The device must be stored in a dry place that is free of shock and dust. Components such as plug-in modules that may get damaged due to electrostatic discharge should be transported as well as stored only in conductive packaging. The guards and covers of the product must be installed properly before it is switched on. They should never be in contact with any live part. The drive controller can be dispatched safely to any address worldwide through a trustworthy vendor team.

  • HDD022W016NHD3201FW
  • hdd02.2-w016n-hd32-01-fw
  • HDD02 2 W016N HD32 01 FW
  • HDD2.2-W016N-HD32-01-FW

HDD02.2-W016N-HD32-01-FW Technical Specifications

Command Communication: SERCOS
Controller Family: DIAX04
Cooling : Internal Air
Rated Current: 16
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo