Product Description

The DKR03.1-W200N-BE31-01-FW drive controller must be checked for damage and/or malfunctioning before commencing its operation. This Bosch Rexroth controller is intended for use in commercial machinery. This device may experience a high electrical voltage due to improper connections and cause severe electrical shock. Any work must be done on the product only after five minutes of switching off the power so that the capacitors get discharged fully. The controller housing and the connected motor must be grounded based on the connection diagram before the product is turned on. The unit may encounter dangerous movement due to faulty control at any point in time during operation. The product is backed by a one-year warranty from Wake Industrial.

The drive controller can be connected to the ADS, 1MB and ADM series of motors from the manufacturer. These motors have a continuous power rating between 10 and 93kW at the output shaft. The drives of the controller have high control levels. The controller comes fitted with an emergency stop shutdown device and an integrated mains contactor. It supports integration with a brake resistor. The product has a function numeric code of 31. The device does not incorporate a bleeder. It comes with a blower and heatsink integrated into the housing. The DKR03.1-W200N-BE31-01-FW unit can be dispatched to the address of your choice by Wake Industrial.

The firmware of the controller is installed on the DSM software module in the EPROM form. The basic unit does not have any plug-in cards in its U1 to U5 slots. The product has a protection rating of IP 20 in adherence to EN 60529 specifications. The ambient operating temperature ranges between 5°C and 45°C with rated data. The device has a control voltage rating of 230VAC +/-10% and a system frequency of 50 to 60 Hz. The drive controller weighs close to 49kg while the accessories kit weighs 1.7kg.