Product Description

The DKR03.1-W100N-BA03-01-FW is a drive controller in the DKR product group manufactured by Rexroth Indramat. The approximate weight of this equipment is 49 Kg. The rated current of the controller and the system frequency is 100 Amps and 50-60 Hz respectively. The DKR03.1-W100N-BA03-01-FW adopts a built-in blower cooling method in its housing, and it does not have a bleeder.

This controller adopts a resolver motor feedback method, and an analog interface is utilized for its command communications. The software module of the DKR03.1-W100N-BA03-01-FW must be sourced as a separate package and installed as EPROMs on the plug-in module(s) or DSM firmware modules. The total dissipation of heat is rated at 900 W, but with a coolant or via air channels, the heat dissipation is rated 600 W. The peak regenerated shaft power of this equipment per 10 seconds is rated ca. 26 kW, and it has a peak current rating of 71 Amps. The DKR03.1-W100N-BA03-01-FW has a control voltage rating of 230V ±10% AC. Also, the maximum allowable power voltage frequency for a 4 kHz drive controller is 800 Hz, and for an 8kHz controller, it is rated for 1600 Hz.

The permissible ambient condition and the installation elevation of the DKR03.1-W100N-BA03-01-FW have set values of +5 to +45 degrees and 0-1000 m respectively. Any deviation from these set conditions could result in damage to the equipment. However, increasing the load capacity of the drive controller can stretch it beyond the prescribed ambient condition. Also, the adequate dissipation of heat in the DKR03.1-W100N-BA03-01-FW can be hampered by a clogged cooling system. To improve the cooling efficiency of this equipment, the appropriate filters must be used, and if there will be any maintenance required, it must be executed by skilled personnel. This unit can be shipped globally with a one-year warranty period from Wake Industrial.