Product Description

The DKR02.1-W200N-BA05-01-FW is a DKR series drive controller from Rexroth Indramat. All safety instructions included in the manufacturer documentation should be followed during installation and operation of the controller. Inappropriate use of the drive controller or failure to follow safety instructions can lead to damage, personal injury or electrical shock. Personnel involved in the installation and operation of the DKR02.1-W200N-BA05-01-FW should possess the relevant qualification and experience. Persons with metal implants or those who are fitted with pacemakers should be prevented form going near an operating DKR02.1-W200N- BA05-01-FW controller. The drive is designed for control of Indramat motors. It offers rated output of 200 Amps. The continuous drive output at 4 kilohertz and 8 kilohertz is 120 Amps and 95 Amps respectively. The peak drive current is 141 Amps.

The peak power of the DKR02.1-W200N-BA05-01-FW drive is 55 kilowatts. If an auxiliary brake resistor is installed, the maximum braking energy of the brake resistor is 240 kilowatts, the continuous power of the brake resistor is 1.5 kilowatts and the peak power of the brake resistor is 90 kilowatts. The DKR02.1-W200N-BA05-01-FW is an air cooled device and includes built-in blower. Other features available on the DKR02.1-W200N-BA05-01-FW include digital servo and resolver feedback and analog command communication interface. The DKR02.1-W200N-BA05-01-FW does not include an integrated bleeder. Firmware for the drive installs on the firmware module. The drive parameters are also stored on the firmware module. In case of drive failure, the firmware module can be removed and can be installed on the replacement drive. This means that the replacement drive does not need to be reconfigured which minimizes system downtime. Weight of the drive is approximately 104 kilograms. This unit can be shipped globally with a one-year warranty period from Wake Industrial.