DDS02.1-W050-RL02-01-FW

  • Rated 4.5 (32 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911273183
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DDS02.1-W050-RL02-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Internal Cooling, 50A rated current, and Resolver Feedback.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

DDS02.1-W050-RL02-01-FW

  • Rated 4.5 (32 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911273183
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The DDS02.1-W050-RL02-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Internal Cooling, 50A rated current, and Resolver Feedback.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DDS02.1-W050-RL02-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DDS02.1-W050-RL02-01-FW DDS series drive controller with a modular design belongs to the DIAX02 product group. This Bosch Rexroth controller acts as a rapid-response drive when it operates along with the manufacturer’s LAR, MKD and MDD series of AC motors. The product must be operated only if the application is allowed by the national EMC directives. The electrical connecting points of the components of the device should not be touched when it is in ON state. The housing is subject to high voltages if the earth wire is not connected before testing. The unit must be in standstill mode before the danger zone is entered or accessed. The controller utilizes heat technology to keep itself cool when in use.  It is equipped with two configuration rating plates for the hardware and firmware.

The drive controller makes use of resolver feedback. The incorporation of heat technology results in the dissipation of heat inside the cabinet or housing. As a result, it may be required to implement air conditioning. The device weighs approximately 7.5kg. The product features a protection category of IP 10 in adherence with DIN 40 050 specifications. Its signal lines must feature D subminiature plugin connectors or plugin clamps. The analog signals should be routed through shielded leads. The shields should be mounted on the drive controller. The components of the drive controller are tested according to the high-voltage test VDE 0160 specifications. 

If multiple drive controllers are used, they are connected adjacent to each other through a DC bus rail. The bus cable is inserted into the X1 connector of the product. The ready to operate Bb contact has a switching capacity of 1A and 24VDC. The controller incorporates a single-axis positioning control communications module. This module supports programming of a maximum of 3,000 program blocks. The drive controller can be delivered to the address of your choice with a one-year industrial warranty.

DDS02.1-W050-RL02-01-FW Documents

  • DDS021W050RL0201FW
  • DDS02 1 W050 RL02 01 FW
  • dds02.1-w050-rl02-01-fw

DDS02.1-W050-RL02-01-FW Technical Specifications

Cooling: Internal Cooling
Motor Feedback: Resolver Feedback
Rated Current: 50A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo