CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW

  • Rated 4.8 (8 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911306865
  • Stock: Available
  • Call for Expedited Shipping and Product Condition Options
The CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW control unit is manufactured by Bosch Rexroth Indramat. The unit utilizes SERCOS Interface as its form of master communication, and it is equipped with various interface options including Encoder HSF/RSF and Encoder EnDat 2.1/1Vpp/TLL.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW

  • Rated 4.8 (8 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911306865
  • Stock: Available
  • Call for Expedited Shipping and Product Condition Options
The CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW control unit is manufactured by Bosch Rexroth Indramat. The unit utilizes SERCOS Interface as its form of master communication, and it is equipped with various interface options including Encoder HSF/RSF and Encoder EnDat 2.1/1Vpp/TLL.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW control section is plugged into the power section of a drive controller from Bosch Rexroth. The manufacturer’s control section supports a SERCOS interface for master communication. The union nut used to fasten the interface has a tightening torque of 0.6Nm. The module has switching frequencies of 2, 4, and 8kHz. It has an interface for a control panel and a serial interface. The module has two digital inputs. The dimensions of the unit are 103 x 322.6 x 49.5mm. The X33 and X34 connectors used for connecting the digital inputs support the use of stranded wires with 0.75 to 1.5mm2cross-section and 20-14AWG thickness for connection. The control section comes with a one-year Wake Industrial warranty.

The two digital inputs and one analog input of the product are connected parallel to each other. This parallel connection helps to lower the resistance present in the analog input. The section can be fitted with several optional modules on specific slots. The optional modules that are used for device functions support only a one-time configuration. The product features an HSF/RSF encoder on its X4.1 connector. It also has an EnDat 2.1 / 1Vpp / TLL encoder on its X4.2. X8.1 and X8.2 connectors. The firmware for the control section should be ordered separately.

The control section is equipped with safety technology I/O. The unit is fitted into the power section using a plugging mechanism. The SERCOS interface of the device features a distortion LED. The drive controller that has this interface can be connected to a high-level control unit using fiber optic cables that must be ordered separately. The product houses a standard control panel. The maximum permissible bus length of the unit depends on the bus rate. The encoder features a supply voltage rating of 5V +/-5% per cable. The control section can be shipped globally through our logistics network.

CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW Documents

  • CDB011CSEEN1EN2EN2EN2S1SNNFW
  • CDB01 1C SE EN1 EN2 EN2 EN2 S1 S NN FW
  • cdb01.1c-se-en1-en2-en2-en2-s1-s-nn-fw

CDB01.1C-SE-EN1-EN2-EN2-EN2-S1-S-NN-FW Technical Specifications

Master Communication: SERCOS Interface
Option 1: Encoder HSF/RSF
Option 2: Encoder EnDat 2.1/1Vpp/TLL
Option 3: Encoder EnDat 2.1/1Vpp/TLL
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo